Trimethyl phosphate

Trimethyl phosphate
Ball-and-stick model of trimethyl phosphate
Names
Preferred IUPAC name
Trimethyl phosphate
Other names
Phosphoric acid trimethyl ester
Methyl phosphate, tribasic
Trimethoxyphosphine oxide
Trimethyl orthophosphate fraction
Identifiers
  • 512-56-1 checkY
3D model (JSmol)
  • Interactive image
Abbreviations TMP
1071731
ChEBI
  • CHEBI:46324 checkY
ChemSpider
  • 10101 checkY
ECHA InfoCard 100.007.405
49926
  • 10541
RTECS number
  • TC8225000
UNII
  • Z1E45TMW1Z checkY
  • DTXSID1021403
  • InChI=1S/C3H9O4P/c1-5-8(4,6-2)7-3/h1-3H3 checkY
    Key: WVLBCYQITXONBZ-UHFFFAOYSA-N checkY
  • InChI=1/C3H9O4P/c1-5-8(4,6-2)7-3/h1-3H3
    Key: WVLBCYQITXONBZ-UHFFFAOYAV
  • O=P(OC)(OC)OC
Properties
(CH3O)3PO
Molar mass 140.08
Appearance Colorless liquid
Melting point −46 °C (−51 °F; 227 K)
Boiling point 197 °C (387 °F; 470 K)
good
Hazards
GHS labelling:
GHS05: CorrosiveGHS07: Exclamation markGHS08: Health hazard
Danger
H302, H315, H318, H319, H340, H350, H351, H361, H373
P201, P202, P260, P264, P270, P280, P281, P301+P312, P302+P352, P305+P351+P338, P308+P313, P310, P314, P321, P330, P332+P313, P337+P313, P362, P405, P501
NFPA 704 (fire diamond)
NFPA 704 four-colored diamondHealth 2: Intense or continued but not chronic exposure could cause temporary incapacitation or possible residual injury. E.g. chloroformFlammability 1: Must be pre-heated before ignition can occur. Flash point over 93 °C (200 °F). E.g. canola oilInstability 0: Normally stable, even under fire exposure conditions, and is not reactive with water. E.g. liquid nitrogenSpecial hazards (white): no code
2
1
0
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
checkY verify (what is checkY☒N ?)

Trimethyl phosphate is the trimethyl ester of phosphoric acid. It is a colourless, nonvolatile liquid. It has some specialized uses in the production of other compounds.[1]

Production

Trimethyl phosphate is prepared by treating phosphorus oxychloride with methanol in the presence of an amine base:

POCl3 + 3 CH3OH + 3 R3N → PO(OCH3)3 + 3 R3NH+Cl

It is a tetrahedral molecule that is a weakly polar solvent.

Applications

Trimethyl phosphate is a mild methylating agent, useful for dimethylation of anilines and related heterocyclic compounds.[2] The method is complementary to the traditional Eschweiler-Clarke reaction in cases where formaldehyde engages in side reactions.

Trimethyl phosphate is used as a solvent for aromatic halogenations and nitrations as required for the preparation of pesticides and pharmaceuticals.

Other applications

It is used as a color inhibitor for fibers (e.g. polyester) and other polymers. Trimethyl phosphate is used as a simulant for chemical weapon nerve agents.[citation needed]

Safety considerations

With an LD50 of 2g/kg for rats, trimethylphosphate is expected to have low acute toxicity.[3]

References

  1. ^ D. E. C. Corbridge "Phosphorus: An Outline of its Chemistry, Biochemistry, and Technology" 5th Edition Elsevier: Amsterdam 1995. ISBN 0-444-89307-5.
  2. ^ William A. Sheppard (1973). "m-Trifluoromethyl-N,N-dimethylaniline". Organic Syntheses; Collected Volumes, vol. 5, p. 1085.
  3. ^ J. Svara, N. Weferling, T. Hofmann "Phosphorus Compounds, Organic" in Ullmann's Encyclopedia of Industrial Chemistry, Wiley-VCH, Weinheim, 2006. doi:10.1002/14356007.a19_545.pub2

External links

  • WebBook page for C3H9PO4
Retrieved from "https://en.wikipedia.org/w/index.php?title=Trimethyl_phosphate&oldid=1165645565"