Liberation Class

Liberation class 2-8-0 locomotive
Polish Tr202-19 in a heritage park in Chabówka.
Type and origin
Power typeSteam
BuilderVulcan Foundry (120),
Đuro Đaković (10)
Serial numberVF 5357–5476
Build date1946 (120), 1957–58 (10)
Specifications
Configuration:
 • Whyte2-8-0
 • UIC1′D h2
Gauge1,435 mm (4 ft 8+12 in) standard gauge
Driver dia.4 ft 9+18 in (1.451 m)
Water cap.5,500 imp gal
(25,000 L; 6,600 US gal)
Boiler pressure232 psi (1.60 MPa)
CylindersTwo, outside
Cylinder size21.625 in × 28 in
(549 mm × 711 mm)
Performance figures
Tractive effort45,200 lbf (201.1 kN)
Career
Operators
Numbers
  • CFL: 4701–4710
  • ČSD: 459.001–459.015
  • JŽ: 38.001–38.075
  • PKP: Tr202.1–Tr202.30

The Liberation Class was a class of 2-8-0 steam locomotives designed for heavy freight work in post-Second World War Europe. 120 were built by the Vulcan Foundry of Newton-le-Willows in 1946.

Design

They shared some features[citation needed] with the earlier WD Austerity 2-8-0 and WD Austerity 2-10-0 which in turn had been based on the LMS Stanier Class 8F. They were however built to the continental loading gauge, but the design was intended to last, not a short-term kriegslok.

Distribution

Ten went to Luxembourg and the rest to Eastern Europe. The United Nations Relief and Rehabilitation Administration distributed them as follows:

Preservation

One Liberation class locomotive remains in Kraków, Poland Tr202-19 built in 1946.[1] A second (also not in working condition) is in Jaworzyna Slask, Lower Silesia, South West Poland Tr202-28.[2]

References

  1. ^ "PKP(UNRRA) No. Tr202-19(1D-49) Chabówka, Poland". steamlocomotive.info.
  2. ^ "Tr202-28 odrestaurowany!" (in Polish).

External links

  • Tr202
  • CFL class 47
  • Vulcan Foundry Publicity Leaflet on the Liberation Class
Retrieved from "https://en.wikipedia.org/w/index.php?title=Liberation_Class&oldid=1188343771"