ISFET

An ion-sensitive field-effect transistor (ISFET) is a field-effect transistor used for measuring ion concentrations in solution; when the ion concentration (such as H⁺, see pH scale) changes, the current through the transistor will change accordingly. Here, the solution is used as the gate electrode. A voltage between substrate and oxide surfaces arises due to an ion sheath. It is a special type of MOSFET (metal–oxide–semiconductor field-effect transistor),^[1] and shares the same basic structure, but with the metal gate replaced by an ion-sensitive membrane, electrolyte solution and reference electrode.^[2] Invented in 1970, the ISFET was the first biosensor FET (BioFET).

The surface hydrolysis of Si–OH groups of the gate materials varies in aqueous solutions due to pH value. Typical gate materials are SiO₂, Si₃N₄, Al₂O₃ and Ta₂O₅.

The mechanism responsible for the oxide surface charge can be described by the site binding model, which describes the equilibrium between the Si–OH surface sites and the H⁺ ions in the solution. The hydroxyl groups coating an oxide surface such as that of SiO₂ can donate or accept a proton and thus behave in an amphoteric way as illustrated by the following acid-base reactions occurring at the oxide-electrolyte interface:

—Si–OH + H₂O     ↔   —Si–O⁻     + H₃O⁺

—Si–OH + H₃O⁺   ↔   —Si–OH₂⁺ + H₂O

An ISFET's source and drain are constructed as for a MOSFET. The gate electrode is separated from the channel by a barrier which is sensitive to hydrogen ions and a gap to allow the substance under test to come in contact with the sensitive barrier. An ISFET's threshold voltage depends on the pH of the substance in contact with its ion-sensitive barrier.

Practical limitations due to the reference electrode

An ISFET electrode sensitive to H⁺ concentration can be used as a conventional glass electrode to measure the pH of a solution. However, it also requires a reference electrode to operate. If the reference electrode used in contact with the solution is of the AgCl or Hg₂Cl₂ classical type, it will suffer the same limitations as conventional pH electrodes (junction potential, KCl leak, and glycerol leak in case of gel electrode). A conventional reference electrode can also be bulky and fragile. A too large volume constrained by a classical reference electrode also precludes the miniaturization of the ISFET electrode, a mandatory feature for some biological or in vivo clinical analyses (disposable mini-catheter pH probe). The breakdown of a conventional reference electrode could also make problem in on-line measurements in the pharmaceutical or food industry if highly valuable products are contaminated by electrode debris or toxic chemical compounds at a late production stage and must be discarded for the sake of safety.

For this reason, since more than 20 years many research efforts have been dedicated to on-chip embedded tiny reference field effect transistors (REFET). Their functioning principle, or operating mode, can vary, depending on the electrode producers and are often proprietary and protected by patents. Semi-conductor modified surfaces required for REFET are also not always in thermodynamical equilibrium with the test solution and can be sensitive to aggressive or interfering dissolved species or not well characterized aging phenomena. This is not a real problem if the electrode can be frequently re-calibrated at regular time interval and is easily maintained during its service life. However, this may be an issue if the electrode has to remain immersed on-line for prolonged period of time, or is inaccessible for particular constrains related to the nature of the measurements itself (geochemical measurements under elevated water pressure in harsh environments or under anoxic or reducing conditions easily disturbed by atmospheric oxygen ingress or pressure changes).

A crucial factor for ISFET electrodes, as for conventional glass electrodes, remains thus the reference electrode. When troubleshooting electrode malfunctions, often, most of the problems have to be searched for from the side of the reference electrode.

Low-frequency noise of ISFET

For ISFET-based sensors, low-frequency noise is most detrimental to the overall SNR as it can interfere with biomedical signals which span in the same frequency domain.^[3] The noise has mainly three sources. The noise sources outside the ISFET itself are referred to as the external noise, such as environmental interference and instrument noise from terminal read-out circuits. The intrinsic noise refers to that appearing in the solid part of an ISFET, which is mainly caused by the trapping and de-trapping of carriers at the Oxide/Si interface. And the extrinsic noise is generally rooted in the liquid/oxide interface causing by the ion exchange at the liquid/oxide interface. Many methods are invented to suppress the noise of ISFET. For example, to suppress the external noise, we can integrate a bipolar junction transistor with ISFET to realize immediate the internal amplification of drain current.^[4] And to suppress the intrinsic noise we can replace the noisy oxide/Si interface by a Schottky junction gate.^[5]

History

The basis for the ISFET is the MOSFET. Dutch engineer Piet Bergveld, at the University of Twente studied the MOSFET and realized it could be adapted into a sensor for electrochemical and biological applications.^[6][1] This led to Bergveld's invention of the ISFET in 1970.^[7][6] He described the ISFET as "a special type of MOSFET with a gate at a certain distance".^[1] It was the earliest Biosensor FET (BioFET).^[8]

ISFET sensors could be implemented in integrated circuits based on CMOS (complementary MOS) technology. ISFET devices are widely used in biomedical applications, such as the detection of DNA hybridization, biomarker detection from blood, antibody detection, glucose measurement and pH sensing.^[2] The ISFET is also the basis for later BioFETs, such as the DNA field-effect transistor (DNAFET),^[2][7] used in genetic technology.^[2]

See also

• Chemical field-effect transistor
• Ion-selective electrodes
• MISFET: metal–insulator–semiconductor field-effect transistor
• MOSFET: metal–oxide–semiconductor field-effect transistor
• pH
• pH meter
• Potentiometry
• Quinhydrone electrode
• Saturated calomel electrode
• Silver chloride electrode
• Standard hydrogen electrode

References

Bibliography

• Bergveld, P. (2003). "Thirty years of ISFETOLOGY, What happened in the past 30 years and what may happen in the next 30 years". Sensors and Actuators B: Chemical. 88: 1–20. doi:10.1016/S0925-4005(02)00301-5.

• Bergveld, P. (2003). ISFET, theory and practice (PDF). IEEE Sensor Conference, October 2003. Toronto: IEEE. p. 26.
• ISFET pH Sensors

Further reading

• Rothberg, Johnathan M (2011). "An integrated semiconductor device enabling non-optical genome sequencing". Nature. 475 (7356): 348–52. doi:10.1038/nature10242. ISSN 1476-4687. PMID 21776081.
• Bergveld, P. (1985). "The impact of MOSFET-based sensors". Sensors and Actuators. 8 (2): 109–127. Bibcode:1985SeAc....8..109B. doi:10.1016/0250-6874(85)87009-8. ISSN 0250-6874.
• Bergveld, P. (1986). "The development and application of FET-based biosensors". Biosensors. 2 (1): 15–33. doi:10.1016/0265-928X(86)85010-6. ISSN 0265-928X. PMID 3790175.
• Bergveld, P. (1991). "A critical evaluation of direct electrical protein detection methods". Biosensors and Bioelectronics. 6 (1): 55–72. doi:10.1016/0956-5663(91)85009-L. ISSN 0956-5663. PMID 2049171.
• Bergveld, P. (2003). "Thirty years of ISFETOLOGY: What happened in the past 30 years and what may happen in the next 30 years". Sensors and Actuators B: Chemical. 88 (1): 1–20. doi:10.1016/S0925-4005(02)00301-5. ISSN 0925-4005.
• Bergveld, P. (2003). ISFET, theory and practice (PDF). IEEE Sensor Conference Toronto, October 2003. Toronto: IEEE. pp. 26 pp. Archived from the original (PDF) on 2008-08-20.
• Bergveld, P; A Van den Berg; PD Van der Wal; M Skowronska-Ptasinska; EJR Sudhölter; DN Reinhoudt (1989). "How electrical and chemical requirements for REFETs may coincide". Sensors and Actuators. 18 (3–4): 309–327. doi:10.1016/0250-6874(89)87038-6. ISSN 0250-6874.
• Chudy, M; W Wróblewski; Z Brzózka (1999). "Towards REFET". Sensors and Actuators B: Chemical. 57 (1–3): 47–50. doi:10.1016/S0925-4005(99)00134-3. ISSN 0925-4005.
• Chudy, Michal; Wojciech Wróblewski; Zbigniew Brzózka (1999). "Towards REFET". Sensors and Actuators B: Chemical. 57 (1–3): 47–50. doi:10.1016/S0925-4005(99)00134-3. ISSN 0925-4005.
• Collins, S.D. (1993). "Practical limits for solid-state reference electrodes". Sensors and Actuators B: Chemical. 10 (3): 169–178. doi:10.1016/0925-4005(93)87002-7. ISSN 0925-4005.
• Duroux, P; C Emde; P Bauerfeind; C Francis; A Grisel; L Thybaud; D Armstrong; C Depeursinge; A L Blum (1991). "The ion sensitive field effect transistor (ISFET) pH electrode: a new sensor for long term ambulatory pH monitoring". Gut. 32 (3): 240–245. doi:10.1136/gut.32.3.240. ISSN 0017-5749. PMC 1378826. PMID 2013417.
• Errachid, A.; J. Bausells; N. Jaffrezic-Renault (1999). "A simple REFET for pH detection in differential mode". Sensors and Actuators B: Chemical. 60 (1): 43–48. doi:10.1016/S0925-4005(99)00242-7. ISSN 0925-4005.
• Ghallab, Y.H.; W. Badawy; K.V.I.S. Kaler. "A novel pH sensor using differential ISFET current mode read-out circuit". Proceedings International Conference on MEMS, NANO and Smart Systems. International Conference on MEMS, NANO and Smart Systems. Banff, Alta., Canada. pp. 255–258. doi:10.1109/ICMENS.2003.1222002.
• Guth, U; F Gerlach; M Decker; W Oelßner; W Vonau (2009). "Solid-state reference electrodes for potentiometric sensors". Journal of Solid State Electrochemistry. 13 (1): 27–39. doi:10.1007/s10008-008-0574-7. ISSN 1432-8488. S2CID 94301958.
• Huang, I-Yu. "Chemical sensors research group". Retrieved 2010-11-01. {{cite journal}}: Cite journal requires |journal= (help)
• Huang, I-Yu; Ruey-Shing Huang; Lieh-Hsi Lo (2002). "A new structured ISFET with integrated Ti/Pd/Ag/AgCl Electrode and micromachined back-side P+ contacts". Journal of the Chinese Institute of Engineers. 25 (3): 327–334. doi:10.1080/02533839.2002.9670707. S2CID 109790089. Archived from the original on 2011-07-03. Retrieved 2010-11-01.
• Kal, S.; Bhanu, P. V. (2007). Design and modeling of ISFET for pH sensing. TENCON 2007 - 2007 IEEE Region 10 Conference. Taipei. pp. 1–4. doi:10.1109/TENCON.2007.4428805. ISBN 978-1-4244-1272-3.
• Kisiel, Anna; Agata Michalska; Krzysztof Maksymiuk (September 2007). "Plastic reference electrodes and plastic potentiometric cells with dispersion cast poly(3,4-ethylenedioxythiophene) and poly(vinyl chloride) based membranes". Bioelectrochemistry. 71 (1): 75–80. doi:10.1016/j.bioelechem.2006.09.006. ISSN 1567-5394. PMID 17107827.
• Lee, YC; BK Sohn (2002). "Development of an FET-type reference electrode for pH detection". Journal of the Korean Physical Society. 40 (4): 601–604. Bibcode:2002JKPS...40..601Y. doi:10.3938/jkps.40.601. ISSN 0374-4884.
• Lisdat, F.; W. Moritz (August 1993). "A reference element based on a solid-state structure". Sensors and Actuators B: Chemical. 15 (1–3): 228–232. doi:10.1016/0925-4005(93)85057-H. ISSN 0925-4005.
• Skowronska-Ptasinska, M; PD Van Der Wal; A Van Den Berg; P Bergveld; EJR Sudhölter; DN Reinhoudt (1990). "Reference field effect transistors based on chemically modified ISFETs". Analytica Chimica Acta. 230: 67–73. doi:10.1016/s0003-2670(00)82762-2. ISSN 0003-2670.
• Suzuki, Hiroaki; Taishi Hirakawa; Satoshi Sasaki; Isao Karube (1998-02-15). "Micromachined liquid-junction Ag/AgCl reference electrode". Sensors and Actuators B: Chemical. 46 (2): 146–154. doi:10.1016/S0925-4005(98)00110-5. ISSN 0925-4005.
• van den Berg, A.; A. Grisel; H.H. van den Vlekkert; N.F. de Rooij (January 1990). "A micro-volume open liquid-junction reference electrode for pH-ISFETs". Sensors and Actuators B: Chemical. 1 (1–6): 425–432. doi:10.1016/0925-4005(90)80243-S. ISSN 0925-4005.
• Vonau, W.; W. Oelßner; U. Guth; J. Henze (2010-02-17). "An all-solid-state reference electrode". Sensors and Actuators B: Chemical. 144 (2): 368–373. doi:10.1016/j.snb.2008.12.001. ISSN 0925-4005.