IATA airport code
This article needs additional citations for verification. (February 2021)
A IATA airport code, also known as a IATA location identifier, IATA station code, or simply a location identifier, is a three-character alphanumeric geocode designating many airports and metropolitan areas around the world, defined by the International Air Transport Association (IATA). The characters prominently displayed on baggage tags attached at airport check-in desks are an example of a way these codes are used.
The assignment of these codes is governed by IATA Resolution 763, and it is administered by the IATA's headquarters in Montreal. The codes are published semi-annually in the IATA Airline Coding Directory.
IATA provides codes for airport handling entities, and also for railway stations.
Alphabetical lists of airports sorted by IATA code are available. A list of railway station codes, shared in agreements between airlines and rail lines such as Amtrak, SNCF French Railways, and Deutsche Bahn, is available. However, many railway administrations have their own list of codes for their stations, such as the list of Amtrak station codes.
Airport codes arose out of the convenience that the practice brought pilots for location identification in the 1930s. Initially, pilots in the United States used the two-letter code from the National Weather Service (NWS) for identifying cities. This system became unmanageable for cities and towns without an NWS identifier, and the use of two letters allowed only a few hundred combinations; a three-letter system of airport codes was implemented. This system allowed for 17,576 permutations, assuming all letters can be used in conjunction with each other.
Since the U.S. Navy reserved "N" codes, and to prevent confusion with Federal Communications Commission broadcast call signs, which begin with "W" or "K", the airports of certain U.S. cities whose names begin with one of these letters had to adopt "irregular" airport codes: EWR for Newark, New Jersey, ORF for Norfolk, Virginia, EYW for Key West, Florida, OME for Nome, Alaska and APC for Napa, California. This practice is not followed outside the United States: Karachi is KHI, Warsaw is WAW, and Nagoya is NGO. In addition, since three letter codes starting with Q are widely used in radio communication, cities with "Q" beginning their name also had to find alternate codes, as in the case of Qiqihar (NDG), Quetta (UET), Quito (UIO), and Quimper (UIP).
IATA codes should not be confused with the FAA identifiers of US airports. Most FAA identifiers agree with the corresponding IATA codes, but some do not, such as Saipan whose FAA identifier is GSN and its IATA code is SPN, and some coincide with IATA codes of non-US airports.
Canada's unusual codes–which bear little to no similarity with any conventional abbreviation to the city's name–such as YUL in Montréal, and YEG in Edmonton, originated from the two-letter codes used to identify weather reporting stations in the 1930s. The letters preceding the two-letter code follow the following format:
- "Y" – Indicating “yes”, this letter was used when the station shared its location with an airport.
- "W" – When the weather-reporting station shared its location with no airport, this letter hinted at “Without”.
- "U" – This letter was used when the station was located together with an NDB or non-directional beacon.
- "X" – Suggesting that the last two letters of a code were in use by a Canadian airport, this letter was put in place.
- "Z" – This letter indicated that an airport code had been used for the identification of an airport in the US.
Most large airports in Canada have codes that begin with the letter "Y", [unreliable source?] although not all "Y" codes are Canadian (for example, YUM for Yuma, Arizona, and YNT for Yantai, China), and not all Canadian airports start with the letter "Y" (for example ZBF for Bathurst, New Brunswick). Many Canadian airports have a code that starts with W, X or Z, but none of these are major airports. When the Canadian transcontinental railways were built, each station was assigned its own two-letter Morse code. VR stands for Vancouver, TZ Toronto, QB Quebec, WG Winnipeg, SJ Saint John, YC Calgary, OW Ottawa, EG Edmonton, etc. When the Canadian government established airports, it used the existing railway codes for them as well. If the airport had a weather station, authorities added a "Y" to the front of the code, meaning "Yes" to indicate it had a weather station or some other letter to indicate it did not. When international codes were created in cooperation with the United States, because "Y" was seldom used in the US, Canada simply used the weather station codes for its airports, changing the "Y" to a "Z" if it conflicted with an airport code already in use. The result is that most major Canadian airport codes start with "Y" followed by two letters in the city's name: YOW for Ottawa, YWG for Winnipeg, YYC for Calgary, and YVR for Vancouver, whereas other Canadian airports append the two-letter code of the radio beacons that were the closest to the actual airport, such as YQX in Gander and YXS in Prince George.
Four of the ten provincial capital airports in Canada have ended up with codes beginning with YY, including YYZ for Toronto, Ontario, YYJ for Victoria, British Columbia, YYT for St. John's, Newfoundland, and YYG for Charlottetown, Prince Edward Island. Canada's largest airport is YYZ  for Toronto–Pearson (As YTZ was already allocated to Toronto City Airport, the airport was given the station code of Malton, Mississauga, where it is located.) YUL is used for Montréal–Trudeau (UL was the ID code for beacon in the city of Kirkland, now the location of Montréal–Trudeau). While these codes make it difficult for the public to associate them with a particular Canadian city, some codes have become popular in usage despite their cryptic nature, particularly at the largest airports. Toronto's code has entered pop culture in the form of "YYZ", a song by the rock band Rush which utilizes the Morse code signal as a musical motif. Some airports have started using their IATA codes as brand names, such as Calgary International Airport (YYC) and Vancouver International Airport (YVR).
Numerous New Zealand airports use codes that contain the letter Z, to distinguish them from similar airport names in other countries. Examples include HLZ for Hamilton, ZQN for Queenstown, and WSZ for Westport.
Naming conventions in general
Predominantly, airport codes are named after the first three letters of the city in which it is located—ATL for Atlanta, IND for Indianapolis, ASU for Asunción, MEX for Mexico City, DEN for Denver, IST for Istanbul; or a combination of the letters in its name, ALA for Almaty (formerly known as Alma-Ata), ORK for Cork, EWR for Newark, GDL for Guadalajara, JNB for Johannesburg, HKG for Hong Kong, SLC for Salt Lake City and WAW for Warsaw. Some airports in the United States retained their NWS codes and simply appended an X at the end, such as LAX for Los Angeles, PDX for Portland, and PHX for Phoenix.
Sometimes the airport code reflects pronunciation, rather than spelling, such as NAN, which reflects the pronunciation of "Nadi" as [ˈnandi] in Fijian, where "d" is realized as the prenasalized stop [ⁿd].
For many reasons, some airport codes do not fit the normal scheme described above. Some airports, for example, cross several municipalities or regions, and therefore, use codes derived from some of their letters, resulting in DFW for Dallas/Fort Worth, DTW for Detroit–Wayne County, LBA for Leeds–Bradford (Airport), MSP for Minneapolis–Saint Paul, and RDU for Raleigh–DUrham. Other airports—particularly those serving cities with multiple airports—have codes derived from the name of the airport itself, such as JFK for New York's John F. Kennedy or CDG for Paris' Charles de Gaulle (see below). In some cases, the code comes from the airport's unofficial name, such as Kahului Airport's OGG (for local aviation pioneer Jimmy Hogg).
Cities with multiple commercial airports
In large metropolitan areas, airport codes are often named after the airport itself instead of the city it serves, while another code is reserved which refers to the city itself which can be used to search for flights to any of its airports. For instance:
- Beijing (BJS) – Capital (PEK) and Daxing (PKX).
- Belo Horizonte (BHZ) – Confins (CNF) and Pampulha (PLU).
- Bucharest (BUH) – Otopeni (OTP) is named after the town of Otopeni where the airport is located, while the city also has a business airport inside the city limits named Băneasa (BBU).
- Buenos Aires (BUE) – Ezeiza (EZE) is named after the suburb in Ezeiza Partido where the airport is located, while Aeroparque Jorge Newbery (AEP) is in the city proper.
- Chicago (CHI) – O'Hare (ORD), named after Orchard Field, the airport's former name, Midway (MDW), and Rockford (RFD)
- Jakarta (JKT) – Soekarno–Hatta (CGK) is named after Cengkareng, the district in which the airport is located, while the city also has another airport, Halim Perdanakusuma (HLP). JKT used to refer to the city's former airport, Kemayoran Airport, which closed down in the mid-1980s.
- London (LON) – Heathrow (LHR), Gatwick (LGW), City (LCY), Stansted (STN), Luton (LTN) and Southend (SEN)
- Milan (MIL) – Malpensa (MXP), Linate (LIN) and Orio al Serio (BGY)
- Montreal (YMQ) – Trudeau (YUL), Mirabel (YMX), and Saint-Hubert (YHU)
- Moscow (MOW) – Sheremetyevo (SVO), Domodedovo (DME), Vnukovo (VKO), Ostafyevo (OSF), Zhukovsky (ZIA)
- New York City (NYC) – John F. Kennedy (JFK, formerly Idlewild (IDL)), LaGuardia (LGA), and Newark (EWR)
- Osaka (OSA) – Itami (ITM, formerly OSA), Kansai (KIX), and Kobe (UKB)
- Paris (PAR) – Orly (ORY), Charles de Gaulle (CDG), Le Bourget (LBG) and Beauvais (BVA)
- Rio de Janeiro (RIO) – Galeão (GIG) and Santos Dumont (SDU)
- Rome (ROM) – Fiumicino (FCO) and Ciampino (CIA)
- São Paulo (SAO) – Congonhas (CGH), Guarulhos (GRU) and Campinas (VCP)
- Sapporo (SPK) – Chitose (CTS) and Okadama (OKD)
- Seoul (SEL) – Incheon (ICN) and Gimpo (GMP, formerly SEL)
- Stockholm (STO) – Arlanda (ARN), Bromma (BMA), Nyköping–Skavsta (NYO) and Västerås (VST)
- Tenerife (TCI) – Tenerife North (TFN) and Tenerife South (TFS)
- Tokyo (TYO) – Haneda (HND, formerly TYO) and Narita (NRT)
- Toronto (YTO) – Pearson (YYZ), Bishop (YTZ), Hamilton (YHM), and Waterloo (YKF)
- Washington, D.C. (WAS) – Dulles (IAD), Reagan (DCA), and Baltimore–Washington (BWI)
Or using a code for the city in one of the major airports and then assigning another code to another airport:
- Almaty (ALA) – Self-named (ALA) and Burundai (BXJ)
- Bangkok (BKK) – Suvarnabhumi (BKK) and Don Mueang (DMK, formerly BKK)
- Belfast (BFS) – International (BFS) and George Best (BHD)
- Berlin (BER) – Self-named (BER). The city also previously had three airports, Tempelhof (THF), Schönefeld (SXF) and Tegel (TXL), with THF and TXL both now closed. The former Berlin Schönefeld Airport was absorbed into Berlin Brandenburg Airport, with the old Schönefeld terminal becoming Terminal 5.
- Chengdu (CTU) – Shuangliu (CTU), Tianfu (TFU), and Huaizhou (HZU).
- Colombo (CMB) – Bandaranaike (CMB) and Ratmalana (RML)
- Dakar (DKR) – Senghor (DKR) and Diass (DSS)
- Dallas–Fort Worth (DFW) – Self-named (DFW), Love Field (DAL), Meacham (FTW), Alliance (AFW), Addison (ADS)
- Dubai (DXB) – Self-named (DXB) and Al Maktoum (DWC)
- Glasgow (GLA) – International (GLA) and Prestwick (PIK)
- Houston (HOU) - Hobby (HOU), Intercontinental (IAH) and Ellington (EFD)
- Istanbul (IST) – Self-named (IST), Sabiha Gökçen (SAW) and Atatürk (ISL, formerly IST)
- Johannesburg (JNB) – O. R. Tambo (formerly Jan Smuts) (JNB) and Lanseria (HLA)
- Kuala Lumpur (KUL) – Sepang (KUL) and Subang (SZB, formerly KUL)
- Kyiv (IEV) – Zhuliany (IEV) and Boryspil (KBP)
- Los Angeles (LAX) – Self-named (LAX), San Bernardino (SBD), Ontario (ONT), Orange County (SNA), Van Nuys (VNY), Palmdale (PMD), Long Beach (LGB) and Burbank (BUR)
- Medellín (MDE) – José María Córdova (MDE) and Olaya Herrera (EOH)
- Melbourne (MEL) - Tullamarine (MEL), Essendon (MEB) and Avalon (AVV)
- Miami (MIA) – Self-named (MIA), Fort Lauderdale (FLL), West Palm Beach (PBI)
- Nagoya (NGO) – Centrair (NGO) and Komaki (NKM, formerly NGO)
- San Diego - Self-named (SAN) and Tijuana (TIJ). TIJ is physically located in Tijuana, Mexico, but offers access directly to and from the US via the Cross Border Xpress.
- San Francisco (SFO) – Self-named (SFO), Oakland (OAK), San Jose–Mineta (SJC), Sonoma–Schulz (STS)
- Seattle (SEA) – Tacoma (Sea–Tac) (SEA) and Paine Field (PAE)
- Shanghai (SHA) – Pudong (PVG) and Hongqiao (SHA)
- Taipei (TPE) – Taoyuan (formerly Chiang Kai-shek) (TPE) and Songshan (TSA, formerly TPE)
- Tehran (THR) – Imam Khomeini (IKA) and Mehrabad (THR)
When different cities with the same name each have an airport, they need to be assigned different codes. These are some examples:
- Birmingham–Shuttlesworth International Airport (BHM) is in Birmingham, Alabama, the United States and Birmingham Airport (BHX) is in Birmingham, England, United Kingdom.
- Norman Y. Mineta San Jose International Airport (SJC) is in San Jose, California, the United States and Juan Santamaría International Airport (SJO) is in San José, Costa Rica.
- Portland International Jetport (PWM) is in Portland, Maine, while Portland International Airport (PDX) is in Portland, Oregon.
- Manchester Airport (MAN) is in Manchester, England, United Kingdom, while Manchester-Boston Regional Airport (MHT) is in Manchester, New Hampshire, United States.
Sometimes, a new airport is built, replacing the old one, leaving the city's new "major" airport (or the only remaining airport) code to no longer correspond with the city's name. The original airport in Nashville, Tennessee, was built in 1936 as part of the Works Progress Administration and called Berry Field with the designation, BNA. A new facility known as Nashville International Airport was built in 1987 but still uses BNA. This is in conjunction to rules aimed to avoid confusion that seem to apply in the United States, which state that "the first and second letters or second and third letters of an identifier may not be duplicated with less than 200 nautical miles separation." Thus, Washington, D.C. area's three airports all have radically different codes: IAD for Washington–Dulles, DCA for Washington–Reagan (District of Columbia Airport), and BWI for Baltimore (Baltimore–Washington International, formerly BAL). Since HOU is used for William P. Hobby Airport, the new Houston–Intercontinental became IAH. The code BKK was originally assigned to Bangkok–Don Mueang and was later transferred to Suvarnabhumi Airport, while the former adopted DMK. The code ISK was originally assigned to Gandhinagar Airport (Nashik's old airport) and later on transferred to Ozar Airport (Nashik's current airport). Shanghai–Hongqiao retained the code SHA, while the newer Shanghai–Pudong adopted PVG. The opposite was true for Berlin: the airport Berlin–Tegel used the code TXL, while its smaller counterpart Berlin–Schönefeld used SXF; the Berlin Brandenburg Airport has the airport code BER, which is also part of its branding. The airports of Hamburg (HAM) and Hannover (HAJ) are less than 100 nautical miles (190 km) apart and therefore share the same first and middle letters, indicating that this rule might be followed only in Germany.
Cities or airports changing names
Many cities retain historical names in their airport codes, even after having undergone an official name/spelling/transliteration change:
- In Angola: NDD for Sumbe (formerly Novo Redondo), NOV for Huambo (formerly Nova Lisboa), PGI for Chitato (formerly Portugália), VHC for Saurimo (formerly Henrique de Carvalho)
- In Armenia: LWN for Gyumri (formerly Leninakan)
- In Azerbaijan: KVD for Ganja (formerly Kirovabad)
- In Bangladesh: DAC for Dhaka (formerly Dacca)
- In Cambodia: KOS for Sihanoukville (formerly Kampong Som)
- In Canada: YFB for Iqaluit (formerly Frobisher Bay)
- In China: PEK for Beijing (formerly Peking), TSN for Tianjin (formerly Tientsin), CKG for Chongqing (formerly Chungking), NKG for Nanjing (formerly Nanking), TNA for Jinan (formerly Tsinan), TAO for Qingdao (formerly Tsingtao), CTU for Chengdu (formerly Chengtu), KWE for Guiyang (formerly Kweiyang) and CAN for Guangzhou (formerly Canton). The older IATA codes follow Chinese postal romanization, introduced in 1906, officially abolished in 1964 and in use well into the 1980s, while gradually superseded by Pinyin.
- In the Czech Republic: GTW for Holešov Airport serving Zlín (formerly Gottwaldov)
- In Greenland: most airports, including SFJ for Kangerlussuaq (formerly Søndre Strømfjord), GOH for Nuuk (formerly Godthåb) and JAV for Ilulissat (formerly Jakobshavn)
- In India: BOM for Mumbai (formerly Bombay), CCU for Kolkata (formerly Calcutta), and MAA for Chennai (formerly Madras)
- In Indonesia: TKG for Bandar Lampung (formerly Tanjung Karang), UPG for Makassar (formerly Ujung Pandang). In addition, when the Enhanced Indonesian Spelling System was introduced in 1972, a few older IATA codes retained the previous spelling: BTJ for Banda Aceh (formerly Banda Atjeh), DJJ for Jayapura (formerly Djajapura), JOG for Yogyakarta (formerly Jogjakarta)
- In Kazakhstan: NQZ for Nur-Sultan (formerly Astana and Tselinograd (TSE)), SCO for Aktau (formerly Shevchenko), GUW for Atyrau (formerly Guryev), KOV for Kokshetau (formerly Kokchetav), DMB for Taraz (formerly Dzhambyl), PLX for Semey (formerly Semipalatinsk), CIT for Shymkent (formerly Chimkent), DZN for Jezkazgan (formerly Dzhezkazgan)
- In Kyrgyzstan: FRU for Bishkek (formerly Frunze)
- In Madagascar: DIE for Antsiranana (formerly Diego-Suarez), WPB for Boriziny (formerly Port Bergé)
- In Moldova: KIV for Chișinău (formerly Kishinev)
- In Montenegro: TGD for Podgorica (formerly Titograd)
- In Mozambique: VJB for Xai-Xai (formerly João Belo), VPY for Chimoio (formerly Vila Pery), FXO for Cuamba (formerly Nova Freixo)
- In Myanmar: RGN for Yangon (formerly Rangoon); SNW for Thandwe (formerly Sandoway); TVY for Dawei (formerly Tavoy)
- In Pakistan: LYP for Faisalabad when the city changed its name from Lyallpur to Faisalabad in honour of the King Faisal of Saudi Arabia.
- In Russia: LED for St. Petersburg (formerly Leningrad), GOJ for Nizhny Novgorod (formerly Gorky), SVX for Yekaterinburg (formerly Sverdlovsk), KUF for Samara (formerly Kuybyshev), OGZ for Vladikavkaz (formerly Ordzhonikidze), KLD for Tver (formerly Kalinin) and others
- In South Africa: NLP for Mbombela (formerly Nelspruit) and PTG for Polokwane (formerly Pietersburg)
- In South Korea: KAG for Gangneung (formerly Kangnung), TAE for Daegu (formerly Taegu)
- In Tajikistan: LBD for Khujand (formerly Leninabad)
- In Turkmenistan: KRW for Türkmenbaşy (formerly Krasnovodsk); CRZ for Türkmenabat (formerly Chardzhev)
- In Ukraine: IEV for Kyiv (formerly Kiev); VSG for Luhansk (formerly Voroshilovgrad); KGO for Kropyvnytskyi (formerly Kirovograd); LWO for Lviv (formerly Lwów while part of Poland until 1939, and still called Lvov in Russian); IFO for Ivano-Frankivsk (in Soviet times spelt in Russian as Ivano-Frankovsk);
- In Vietnam: SGN for Ho Chi Minh City (formerly Saigon)
- In Western Sahara: VIL for Dakhla (formerly Villa Cisneros)
Some airport codes are based on previous names associated with a present airport, often with a military heritage. These include:
- Chicago's O'Hare, which is assigned ORD based on its old name of Orchard Field. It was expanded and renamed O'Hare in the mid-1950s.
- Rickenbacker International Airport uses LCK, for its former name of Lockbourne Air Force Base.
- North Texas Regional Airport uses PNX, for its former name of Perrin Air Force Station.
- Fresno Yosemite International Airport uses the code FAT, derived from a previous name of the airport, Fresno Air Terminal.
- Orlando International Airport was founded as Orlando Army Air Field #2 but uses MCO for having been renamed McCoy Air Force Base in 1959 in honor of a wing commander who crashed at the field in 1958. It was converted in the early 1960s to joint civilian/military use and renamed Orlando Jetport at McCoy, then renamed Orlando International Airport in the early 1980s.
- Spokane International Airport was so named in 1960 but goes by GEG because it was built on the former Geiger Field, renamed in 1941 for Major Harold Geiger when the US Army acquired it.
- Louis Armstrong New Orleans International Airport was originally named Moisant Field after daredevil aviator John Moisant, who died in 1910 in an airplane crash on agricultural land where the airport is now located. Its IATA code MSY was derived from Moisant Stock Yards, as Lakefront Airport retained the code NEW.
- Lehigh Valley International Airport uses ABE, for its former name of Allentown–Bethlehem–Easton International Airport.
- William R. Fairchild International Airport uses CLM, for its former name of Clallam County Municipal Landing Field.
- Chicago Executive Airport uses PWK, for its former name, Palwaukee Municipal Airport (which was derived from its location on Palatine Road and Milwaukee Avenue).
- Dallas Executive Airport used RBD, for its former name, Redbird Airport.
- TSTC Waco Airport uses CNW, as it was formerly Connally Air Force Base.
- Glacier Park International Airport uses FCA, for its former name Flathead County Airport.
Some airports are named for an administrative division or nearby city, rather than the one they are located in:
- Grand Strand Airport uses CRE for the former municipality of Crescent Beach, South Carolina.
- San Ignacio Town Airstrip, located in San Ignacio, Belize, uses CYD because it is located in the Cayo District.
- Ronald Reagan Washington National Airport in Arlington, Virginia uses DCA for the District of Columbia (DC) and Arlington.
- Prince Naif bin Abdulaziz International Airport in Buraidah, Saudi Arabia uses ELQ for the Al-Qassim Province (El Qassim)
- Damazin Airport in Sudan uses RSS, for the nearby Roseires Dam.
Other airport codes are of obscure origin, and each has its own peculiarities:
- Nashville uses BNA for its former name as Berry Field, henceforth Berry Nashville Airport
- Louisville Muhammad Ali International Airport is SDF for Standiford Field, its original name (Dr. Elisha David Standiford who, as a businessman and legislator, played an important role in Louisville transportation history and owned part of the land on which the airport was built.)
- Knoxville uses TYS for Charles McGhee Tyson, whose family donated the land for the first airport in Knoxville
- Kahului, the main gateway into Maui, uses OGG in homage to Hawaiian aviation pioneer Bertram J. Hogg
- Gold Coast, Australia, uses OOL due to its former name as Coolangatta Airport, named after the suburb in which it is located
- Sunshine Coast, Australia, uses MCY due to its former names Maroochydore Airport and Maroochydore-Sunshine Coast Airport. It is actually located in Marcoola rather than Maroochydore
- Yan'an Nanniwan Airport inherited the ENY code from the city of Yan'an's old airport, Yan'an Ershilipu Airport.
Multiple codes for a single airport
EuroAirport Basel Mulhouse Freiburg, which serves three countries, has three airport codes: BSL, MLH, EAP
Airport codes using the English name of the city
Some European cities have a different name in their respective language than in English, yet the airport code represents only the English name. Examples include:
- CGN - Cologne/Köln (Germany)
- CPH - Copenhagen/København (Denmark)
- FLR - Florence/Firenze (Italy)
- GVA - Geneva/Genève (Switzerland)
- OPO - Oporto/Porto (Portugal)
- PRG - Prague/Praha (Czechia)
- VCE - Venice/Venezia (Italy)
- VIE - Vienna/Wien (Austria)
Lack of codes
There are several airports with scheduled service that have not been assigned ICAO codes that do have IATA codes. For example, several airports in Alaska have scheduled commercial service, such as Stebbins and Nanwalek, which use FAA codes instead. There are also airports with scheduled service for which there are ICAO codes but not IATA codes, such as Nkhotakota Airport/Tangole Airport in Malawi or Chōfu Airport in Tokyo, Japan. There are also several minor airports in Russia (e.g. Omsukchan Airport) which instead use internal Russian codes for booking. Flights to these airports cannot be booked through the international air booking systems or have international luggage transferred there, and thus, they are booked instead through the airline or a domestic booking system. Thus, neither system completely includes all airports with scheduled service. Several heliports in Greenland have 3-letter codes used internally which might be IATA codes for airports in faraway countries.
Use in colloquial speech
Some airports are identified even in the colloquial speech by their airport code. The most notable examples are LAX, DFW and JFK.
- Airline codes
- Airspace class
- Computer network naming scheme, another possible use of IATA airport codes
- ICAO airport code
- International Air Transport Association code
- List of IATA-indexed railway stations
- "Airline and Location Code Search". Iata.org. Retrieved 2021-06-19.
- "Baggage Standards". Iata.org. Retrieved 2021-06-19.
- "Directory of Strategic Partners". Iata.org. Retrieved 2021-06-19.
- "BAGTAG - For everyone who likes to travel smart, easy and fast". Bagtag.com. Retrieved 2021-06-19.
- "Understanding Airport Location Identifiers". Airportguide.com. Retrieved 2021-06-19.
- "IATA 3-Letters Station Codes". Igccllc.net. 2014-03-02. Retrieved 2021-06-19.
- "Airport ABCs: An Explanation of Airport Identifier Codes". Air Line Pilot. Air Line Pilots Association. 1994. Retrieved 6 January 2012.
- "Why Do Canadian Airport Codes Start With The Letter 'Y'? | Airport Codes Explained". Airfarewatchdog Blog. 2019-03-07. Retrieved 2021-06-19.
- "This is why Toronto's airport code is YYZ". Blogto.com. Retrieved 2021-06-19.
- "YYC: Calgary Airport Authority". Retrieved 22 March 2015.
- "Vancouver International Airport Homepage". Yvr.ca. Retrieved 2 July 2022.
- "Airline and Location Code Search". Iata.org. Retrieved 2022-01-14.
- "SDF History". Louisville Muhammad Ali International Airport. Retrieved 2020-11-29.