Corkscrew with Bayerncurve

This article does not cite any sources. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "Corkscrew with Bayerncurve" – news · newspapers · books · scholar · JSTOR (July 2023) (Learn how and when to remove this template message)

Corkscrew with Bayerncurve
Corkscrew at Alton Towers
Status	Discontinued
First manufactured	1979
No. of installations	8
Manufacturer	Vekoma
Designer	Arrow Dynamics
Height	23 m (75 ft)
Drop	21 m (69 ft)
Length	730 m (2,400 ft)
Speed	70 km/h (43 mph)
G force	3.1
Capacity	1100 riders per hour
Vehicles	2
Riders per vehicle	24
Duration	About 1:45 minutes
Restraint Style	Over-the-shoulder
Inversions	2

Corkscrew with Bayerncurve is a type of roller coaster that was manufactured by Vekoma. It was an adaptation of a similar corkscrew coaster designed by Arrow Development. The first model, Tornado, debuted in 1979 at Walibi Belgium. It was also the first roller coaster in mainland Europe to feature inversions.

Intended ride experience

The ride starts with a slow ascent of 75 ft (22m). Once it reaches the top, the car goes around a turn and down a 68 ft drop reaching 44 mph. The train then pulls through a camel hump and a 180 degree turn before entering two Corkscrew inversions. Once the train exits the two inversions, it then travels around a 180 degree turn and into some trim brakes (In the latter years, the brakes weren't needed as much). After that, the train drives across another camel hump and into the Bayerncurve, a helix-type maneuver, and around the perimeter of the coaster again, before going into the brakes and station.

Installations

• 
  Corkscrew at Playland
• 
  Corkscrew at Alton Towers

This article about an amusement park is a stub. You can help Wikipedia by expanding it.

• v
• t
• e